Sanyo SCP-2300 - Getting Started With Ready Link

Using Voice-Activated Dialing
With your SCP-2300 by Sanyo, you can use a voice dial tag to
automatically dial a phone number in your Contacts. (A voice dial tag
is a command you record and use to place calls without using the
keypad.) Your phone can store up to 30 voice dial tags. (To create a
voice dial tag, see “Adding a New Contacts Entry” on page 86 or
“Editing a Contacts Entry” on page 90.)
Making a Call Using Voice-Activated Dialing
To use a voice dial tag to call a phone number:
With the flip open:
1. Press or briefly.
2. Follow the system prompts and recite the entry’s Voice Dial tag
into your phone’s microphone.
With the flip closed:
1. Press and hold .
2. Follow the system prompts and recite the entry’s Voice Dial tag
into your phone’s microphone.
Note:To use the Voice Dial function, you must have a stored entries for Voice Dial
(see “Programming Voice Dial Tags” on the next page).
Section 2I: Using Your Phone’s Voice Services 114