6. To enter a message, select Message and press .
7. Use your keypad to enter a text message (or press Mode [right
softkey] to select from Preset Messages, Recent Messages,or
Signature), and press OK (left softkey).
Tip:The Signature option appears only when you set your signature (see page 63).
8. To set the message priority, scroll to Priority and press .
9. Select Ordinary or Urgent and press .
10. To change the recipients or to save the message as a draft, press
Options (right softkey) and select an option from the following.
䡲
Chg Recipients to change Recipients.
䡲
Send Callback# to select from None, My Phone#, or Other to
notify your recipients of your callback number. (See “Setting
a Callback Number” on page 63.)
䡲
Save to Drafts to save the message to a Drafts folder.
Tip:The oldest message in the drafts folder will be erased automatically when
you save more than 10 messages.
11. Press Send (left softkey) to send the message.
Note:If there is a failure when sending a message in no-service area, you are
prompted to select to send the message automatically. Press
Yes (left softkey),
and the message goes to the Outbox folder with the icon. If you press
No (right
softkey), the message goes to the folder with the icon.
Section 3A: Qwest Service Features – The Basics 155
To Next Page
Loading...
