Sanyo SCP-2300 - Using Voice Prompt; Setting up Key Press Echo

Using Voice Prompt
This feature allows you to hear voice prompts at Voice Memo,
Screen Call setting, etc. (default setting is Off).
To enable or disable voice prompt:
1. Press to access the main menu.
2. Select Settings and press .
3. Select Sounds and press .
4. Select Others and press .
5. Select Voice Prompt and press .
6. Select On or Off and press .
Tip:When ringer volume is set to “Silence All,” voice prompts cannot be heard.
See page 45 for Silence All.
Setting Up Key Press Echo
With this feature, you can hear a voice say the numbers when you
press the keypad. This feature is available when you are in standby
mode.
To turn Key Press Echo on or off:
1. Press to access the main menu.
2. Select Settings and press .
3. Select Sounds and press .
4. Select Others and press .
5. Select Key Press Echo and press .
6. Select On or Off and press .
Section 2B: Controlling Your Phone’s Settings 42