Sanyo SCP-2700 - Accessing Sms Voice Messages

3A. Sprint Service: The Basics 107
3. Start recording after the beep. (You can record up to
two minutes.)
4. To finish recording, press DONE (left softkey).
5. Press SEND (left softkey) to send the voice message.
Accessing SMS Voice Messages
©
When you receive a voice message, your phone will
display a notification message. Use your softkeys to
access and play the voice message.
– or –
1. From standby mode, press MESSAGES (left softkey) >
Voice SMS.
2. Highlight a message and press to play. (To
display the message options, press OPTIONS [right
softkey].)
To reply to an SMS voice message:
1. While the message is displayed, press REPLY
(left softkey).
2. Record your reply, and then press DONE (left
softkey) > SEND (left softkey).
– or –
1. From standby mode, press MESSAGES (left softkey) >
Voice SMS.
2. Highlight a message you want to reply and press
REPLY (left softkey).
3. Record your reply, and then press DONE (left
softkey) > SEND (left softkey).
Tip
Press OPTIONS (right softkey) > Reply with to reply
with a picture message or a text message.
Note
You may be prompted foran ID the first time you
send an SMS voice message. Follow the voice or
onscreen instructions to send the message.
Sprint Service