Sanyo SCP-2700 - Setting Roam Mode; Call Guard

3A. Sprint Service: The Basics 111
Setting Roam Mode
Your phone allows you to control yourroaming
capabilities. By using the Roaming menu option, you
can determine which signals yourphone accepts.
Choose from two different settings on your phone to
control yourroaming experience.
1. Press > Settings > More... > Roaming > Set Mode.
2. Highlight an option and press .
n
Sprint Only to access only the Sprint network and
prevent roaming on other networks.
n
Automatic to seek service on the Nationwide Sprint
Network. When Sprint service is unavailable, the
phone searches for an alternate service.
Call Guard
Your phone has two ways of alerting you when you are
roaming off the Nationwide Sprint Network: the
onscreen roaming icon and Call Guard. Call Guard
makes it easy to manage your roaming by requiring an
extra step before you can place or answer a roaming
call. (This additional step is not required when you make
or receive calls while on the Nationwide Sprint Network.)
To turn Call Guard on or off:
1. Press > Settings > More... > Roaming >
Call Guard.
2. Select On or Off.
To place roaming calls with Call Guard on:
1. From standby mode, dial 1 + area code + the
seven-digit number and press .
2. Read the message and press .
Note
Call Guard is turned on by default on your phone.
Voice dialing and speed dialing are not available
when you are roaming with Call Guard enabled.
Sprint Service