2A. Phone Basics 25
To dial or save phone numbers with pauses:
1. Enter all or part of a number.
2. Press OPTIONS (right softkey) > Hard Pause or
2-Sec. Pause.
3. Enter additional numbers.
4. Press OPTIONS (right softkey) > Save to save the
number in your Contacts.
–or–
Press to dial the number.
5. Press to send the additional number if Hard
Pause was selected.
Dialing From the Contacts List
1. From standby mode, press CONTACTS (right
softkey).
2. Highlight the entry you want to call.
3. Press to dial the entry’s default phone number.
–or–
Press the navigation key left or right to show another
number for the entry and press .
Plus (+) Code Dialing
When placing international calls, use Plus Code Dialing
to automatically enter the international access code for
yourlocation. (This feature is subject to network
availability.)
1. Press to display “+” on your phone screen.
2. Dial the country code and phone number you’re
calling, and press . The access code for
international dialing will automatically be dialed,
followed by the country code and phone number.
Note
You can have multiple pauses in a phone number
and combine two-second and hard pauses.
Phone Basics
To Next Page
Loading...
