Sanyo SCP-2700 - Managing Preset Messages

2B. Settings 41
Text Messaging Settings
Setting a CallbackNumber
With this feature, you can specify the callback number
yourrecipients see when you send text messages.
1. From standby mode, press MESSAGES (left softkey) >
Settings > Callback Number.
2. Select My Phone Number, Other, or None. If you select
Other, enter a callback number and press .
Adding a Customized Signature
Add a customized signature to each message you send.
1. From standby mode, press MESSAGES( left softkey) >
Settings > Signature.
2. Select On. (If you do not wish to attach a signature to
youroutgoing messages, select Off.)
3. Enter a signature and press .
Managing Preset Messages
Your phone is loaded with 20 preset messages to help
make sending text messages easier. Customize or
delete these messages, such as “Where are you?,” “Let’s
get lunch,”and “Meet me at” to suit your needs, or add
yourown messages to the list.
To edit or delete a preset message:
1. From standby mode, press MESSAGES (left softkey) >
Settings > Preset Messages. The list of preset
messages will be displayed.
2. To edit or delete a message, highlight it and press
OPTIONS (right softkey).
3. Select Edit, edit the message, and press .
– or –
Select Delete > YES (left softkey) to delete the
message. (You can also reset all messages by
selecting Reset all messages > YES [left softkey].)
Tip
Press OPTIONS (right softkey) > Add Signature to
insert your signature on the message entry screen.
Settings