Sanyo SCP-2700 - Call Answer Mode; Headset Options

46 2B. Settings
Call Answer Mode
Select how to answer incoming calls on your phone
whether by pressing or any key (except softkeys, side
buttons, , and ).
1. Press > Settings > More... > Call Setup >
Call Answer.
2. Select Talk Key or Any Key.
Auto-Answer Mode
Set yourphone to automatically pick up incoming calls.
Remember, your phone will answer calls in auto-answer
mode even if you are not present.
1. Press > Settings > More... > Call Setup >
Auto-Answer.
2. Highlight an option and press .
n
Hands-free to answer calls automatically when the
phone is connected to an optional headset or
hands-free device.
n
Speakerphone to answer calls automatically in
speakerphone mode.
3. Highlight the time you would like yourphone to wait
before answering and press .
Headset Options
Set up yourphone for hands-free use. You can enable
the Turbo Button (operation button on your headset) to
make, receive, or end a call, or to activate ASR (see
page 73). You can also select the ringer mode.
To enable the Turbo Button:
1. Press > Settings > More... > Headset Mode >
Turbo Button.
2. Select On.
n
Press the turbo button to stop the alarm and/or
display the details of message notifications.
(To disable the Turbo Button, follow steps 1 and 2
and select Off.)
To select the ringer mode:
1. Press > Settings > More... > Headset Mode >
Ringer Sound.
2. Select Normal or Headset Only.