2D. Contacts 57
Displaying Contacts Details
1. From standby mode, press CONTACTS (right
softkey).
2. Highlight an entry for which you want to see the
details and press .
3. Highlight any data field and press . You will see
onscreen menu options for the information
displayed.
Adding a New Contacts Entry
1. From standby mode, press CONTACTS (right
softkey) > Add New > New Contact.
2. Enter a name for the new entry and press the
navigation key down.
3. Enter the phone number for the entry and press .
4. Highlight a number type for the entry (Mobile, Home,
Work, Pager, Fax, or Other) and press .
5. Add other information (email address, URL, or street
address, etc.).
6. Press DONE (left softkey).
After you have saved the number, the new Contacts
entry is displayed.
Tip
ICE– In Case of Emergency
To make it easier for emergency personnel to
identify important contacts, you can list your local
emergency contacts under “ICE” in your phone’s
Contacts list. For example, if yourmother is your
primary emergency contact, list her as “ICE–Mom”in
your Contacts list. To list more than one emergency
contact, use “ICE1–___,”“ICE2–___,” etc
.
Note
If you select a group in step 2, entries or phone
numbers belonging to the group are displayed.
Contacts
To Next Page
Loading...
