Sanyo SCP-2700 - Editing a Contacts Entry; Assigning Speed Dial Numbers

2D. Contacts 61
Editing a Contacts Entry
1. From standby mode, press CONTACTS (right
softkey).
2. Highlight the Contacts entry you want to edit and
press OPTIONS (right softkey) > Edit Contact.
3. Select the field you wish to edit, and then add or edit
the information and press .
4. Press DONE (left softkey).
Assigning Speed Dial Numbers
Your phone can store up to 98 phone numbers in speed
dial locations. (See “Speed Dialing”on page 26.)
To assign a speed dial number to a new phone number:
1. Add a phone number to a new or to an existing
Contacts entry. (See “Adding a New Contacts Entry”
on page 57.)
2. Highlight the phone number and press OPTIONS
(right softkey) > Set Speed Dial.
3. Highlight an available speed dial location and
press .
4. Press to return to the Contacts menu.
To assign a speed dial number to an existing phone
number:
1. From standby mode, press CONTACTS (right
softkey).
2. Highlight a Contacts entry and press .
3. Highlight a number and press OPTIONS (right
softkey)> Set Speed Dial.
4. Highlight an available speed dial location and
press .
To check speed dial assignments:
©
From standby mode, press CONTACTS (right
softkey) > OPTIONS (right softkey) > Settings >
Speed Numbers.
Tip
To replace a current assignment, select a location
and press
REPLACE (left softkey).
Contacts