Sanyo SCP-2700 - Checking Phone Status Using Asr; Asr Settings

2F. Voice Services 75
Checking Phone Status Using ASR
You can use ASR to obtain information about your
phone:
v
Status (all of the following except My Phone Number)
v
Time
v
Signal Strength
v
Network
v
Battery
v
My Phone Number
1. Press and hold or .
2. When you hear “Say a command,”say “Check.”
3. When you hear “Which status item?,” say a
command.
ASR Settings
To change ASR confirmation:
1. Press and hold or .
2. Press SETTINGS (right softkey) > Confirmation.
3. Highlight an option and press .
n
Automatic to ask for confirmation only when the
system is not sure what you said.
n
Always Confirm to always ask forconfirmation.
n
Never Confirm to never ask for confirmation.
To adapt the system to your voice:
1. Press and hold or .
2. Press SETTINGS (right softkey) > Adaptation >
Adapt Voice.
3. Press START (left softkey) and repeat each word,
phrase, or telephone number you hear.
To reset the adaptation:
1. Press and hold or .
2. Press SETTINGS (right softkey) > Adaptation >
Reset Voice > YES (left softkey).
Voice Services