Sanyo SCP-3200 - Headset Mode; Sleep Mode; Setting Message Notification; Editing Preset Messages

28
Tip: If you enter less than 5 digits, the display shows a warning message.
Headset Mode
To set Headset mode:
1. Press MENU/OK to access the main menu.
2. Select Settings and press MENU/OK.
3. Select Others and press MENU/OK.
4. Select Headset Mode and press MENU/OK.
5. Select Turbo Button and and press MENU/OK.
6. Select Voice Calls or Ready Link and press MENU/OK.
 Press Info (right softkey) during step 6 above to see the Headset Mode information.
 To deactivate this feature, select Off during step 6 above.
Sleep Mode
This feature helps conserve your battery power by restricting the display.
To set sleep mode:
1. Press MENU/OK to access the main menu.
2. Select Settings and press MENU/OK.
3. Select Display and press MENU/OK.
4. Select Others and press MENU/OK.
5. Select Sleep Mode and press MENU/OK.
6. Select your desired option and press MENU/OK.
 To deactivate this feature, select Off during step 6 above.
Setting Message Notification
You can see message notification when you receive Text message or Voicemail while you are in
PCS applications or Browser mode.
1. Press MENU/OK to access the main menu.
2. Select Settings and press MENU/OK.
3. Select Messaging and press MENU/OK.
4. Select Notification and press MENU/OK.
5. Select Msgs and Icon or Icon only and press MENU/OK.
Editing Preset Messages
Your phone can store pre-set messages for use with text messaging and Picture Mail. You can
edit your phone’s default preset messages through the Settings menu.
To edit your phone’s preset messages:
1. Press MENU/OK to access the main menu.
2. Select Settings and press MENU/OK.
3. Select Messaging and press MENU/OK.
4. Select Preset Msgs and press MENU/OK.
5. Select the message you want to edit and press MENU/OK.
6. Use your keypad to edit the message and press OK (left softkey) or to save your changes.
(“Preset Message Saved” will display.)