Sanyo SCP-3200 - Assigning Speed Dial Numbers

Section 2F: Using Contacts 113
Assigning Speed Dial Numbers
With this feature you can dial Contacts directory entries with
one keypress for locations 2–9. For details on how to make
calls using speed dial numbers, see “Using Speed Dialing”on
page 40.
To assign a speed dial number :
1. Select >Contacts > Speed Dial #s.
2. Select an available speed dial location and press .
3. Select an entry from the list and press .
4. Select the phone number you want to set as a speed dial
number and press .
– or –
1. Select >Contacts > Find/Add Entry.
2. Scroll to an entry in the Contacts list and press .
3. Select the phone number you want to set as a speed dial
number, and then press
Options (right softkey) >
Set Speed Dial
.
4. Select an available speed dial location and press .
Note:
If you attempt to assign an already in-use speed dial location
to a new phone number, a dialog will appear asking if you
wish to overwrite the existing speed dial assignment. Select
Yes to assign the location to the new phone number and
delete the previous speed dial assignment.
Contacts