Section 2I: Using Sprint Ready Link 147
Making a Sprint Ready Link Call (Group Call)
You can make a Sprint Ready Link call to all members in a
Group entry that you have in your Sprint Ready Link List. You
can communicate with up to five members at a time.
To place a Sprint Ready Link Group call:
1. Press .
2. Select Go to (left softkey), and then select the list from
which you want to make a Group call (
Company Grps. or
Personal Grps.).
3. Scroll to the group you want to call, and press and hold
to place the call and take the floor. (You will see
“R-Link calling...”and “Connecting...”followed by “You
have floor.”Continue with the Sprint Ready Link call as
described on the previous page.)
n
To make a Sprint Ready Link call to a group member,
select a group, highlight a group member, and press
and hold .
n
If one of the group members takes the floor, you will
see the member’s name and Sprint Ready Link
number on the display.
4. When the call is finished, press .
Tip:
The phone beeps if you press the Ready Link/Voice Memo key
when another party has the floor.
You can also make a Group Call after checking the group
member. Select MENU to display group members, highlight
<Call Group>and press and hold the Ready Link/Voice Memo
key during step 3 above.
To redial your last Sprint Ready Link call, highlight Redialand
press and hold the Ready Link /Voice Memo key from the
Sprint Ready Link List.
Sprint ReadyLink
To Next Page
Loading...
