Sanyo SCP-3200 - Page 178

162 Section 2I: Using Sprint Ready Link
Setting the Speakerphone for Sprint Ready Link
Calls
You can set your phone to use speakerphone mode for
Sprint Ready Link calls. By default, the speakerphone is
set to on.
To set the speakerphone mode:
©
Select >Settings > Ready Link > Speakerphone >
On
or Off.
Setting the Default View of the Sprint
Ready Link List
You can select the default Sprint Ready Link List when Sprint
Ready Link is launched.
To select the default view of the Sprint Ready Link List:
1. Select >Settings > Ready Link > Default View.
(The available lists will be displayed.)
2. Select a list and press .
Setting the Floor Display for Sprint Ready Link Calls
With this feature, you can select the floor display for the Main
LCD during Sprint Ready Link calls.
To selectthe floor display:
1. Select >Settings > Ready Link > Floor Display.
2. Select Text Only or Text & Image.
Note:
If the phone’s ringer volume is set to Vibrate All, Ringer off, or
Silence All, the speakerphone turns off. Press
SPEAKER
to turn
the speakerphone mode on.