Sanyo SCP-6000 - Changing the Contrast; Setting Font Size; Setting the Animation

Section 11
100 Changing Your Phone’s Settings
Changing the Contrast
To adjust the contrast on the phone’s display:
1.
From the Standby mode, press to display the
main menu.
2.
Highlight
Settings
, and press .
3.
Highlight
Display
, and press .
4.
Highlight
Contrast
, and press .
5.
Select your desired setting, and press .
Setting Font Size
There are four font size settings for the messages and
browser. To change the font size, follow these steps:
1.
From the Standby mode, press to display the
main menu.
2.
Highlight
Settings
, and press .
3.
Highlight
Display
, and press .
4.
Highlight
Font Size
, and press .
5.
Highlight
Messages
or
Browser
, and press .
6.
Select your desired font size.
Then a font size example is shown on the display.
7.
Press to set the selected font.
Setting the Animation
This feature lets you display the animation as a display for
outgoing calls or searching the service. To set the
Animation:
1.
From the Standby mode, press to display the
main menu.
2.
Highlight
Settings
, and press .
3.
Highlight
Display
, and press .
4.
Highlight
Animation
, and press .
5.
Highlight
Outgoing Calls
or
Service Search
depending on your preference.
6.
Press .
7.
Highlight your desired Animation title or a downloaded
data if you have.
Tip:
From the font example
display, you can see
the larger/smaller font
displays by pressing
/ of the
Navigation key.
Note:
The download kit must
be purchased for
downloading the data.
For purchase
information, see
Accessories section on
page 153.