Sanyo SCP-6000 - Downloading the Data; (The Download Kit Must be Purchased for this Feature.)

Personal Information Management 121
13 13
Personal Information
13 13 13
Downloading the Data
(The download kit must be purchased for this feature.)
To download the data from your PC to your phone, you
have to prepare the phone’s status to accept the download
data by using PC Sync menu of your SCP-6000. See the
download kit user guide for detailed information.
To use the PC Sync menu:
1.
Connect your PC to SCP-6000 by using the serial data
cable. (The serial data cable should be purchased
separately.)
2.
Confirm the serial port to which SCP-6000 is attached.
3.
From the phone’s Standby mode, press and select
PC Sync
.
4.
If you’re sure to start “PC Sync”, select
Yes
.
Tip:
For purchase
information, see
Accessories section on
page 153.