Section 13
122 Personal Information Management
Using the Downloaded Data
Setting a Downloaded Sound Data to the Ringer or
Start-up/Power-off Tone
1.
From the Standby mode, press to display the
main menu.
2.
Highlight
Game/Tools
, and press .
3.
Highlight
Downloads
, and press .
4.
Highlight your desired downloaded sound data title and
press . Then starts to play the selected sound.
5.
Press or wait for ending of the sound data play.
6.
Highlight either
Set Ringer
,
Set St-up Tone
or
Set Pw-off Tone
.
䊳
You can also select
Erase
to erase the data.
7.
Press .
8.
Select the space to assign your selected sound data.
䊳
If your selected space is already assigned, you are
prompted whether overwrite it or not.
䊳
The capacity of downloading is as shown below.
Item
Maximum Size per Unit Maximum Assignment
Ringer ~20 KB
~100 KB
20 files
2 files
Start-up Tone
Power-off Tone
~20 KB
~20 KB
3 files
3 files
Tip:
If you have no
downloaded data,
“No Data Downloaded”
is shown on the display.
Tip:
It’s better to erase
the downloaded
data that you have
set to Ringer or
Start-up/Power-off
tone.
(See page 125.)
To Next Page
Loading...
