Section 2F: Using Contacts 107
To assign a contact to a group:
1. Select > Contacts > Find/Add Entry.
2. Select the desired contact and press , and then press
Options (right softkey)> Edit; or if you are selecting an
email or Web address, press Edit (right softkey).
3. Scroll down to the box next to the icon and press .
4. Select a group from the Group list and press .
5. Press Save (left softkey) to save.
Finding Contacts Entries
There are several ways to display your Contacts entries: by
name, by speed dial number, and by group. Follow the steps
outlined in the sections below to display entries from the
Contacts menu.
Finding Names
To find Contacts entries by name:
1. Select > Contacts > Find/Add Entry.
2. Scroll through all the entries using the navigation key.
– or –
Enter the first letter of the name or part of the name.
(The display shows the entries beginning with the
letter(s) entered.)
Shortcut: From standby mode, press Contacts (right softkey) to display the
Contacts menu.
3. To display an entry’s details, select an entry and
press .
4. To make the call, highlight the desired number and
press .
Contacts
To Next Page
Loading...
