Sanyo SCP-8400 - Erasing a Contacts Entry from the List; Assigning an Image to a Contacts Entry

112 Section 2F: Using Contacts
Erasing a Contacts Entry From the List
To erase a selected entry:
1. From standby mode, press Contacts (right softkey).
2. Scroll to the entry you wish to delete by using the
navigation key.
3. Press Options (right softkey) > Erase Contact > Yes.
Assigning an Image to a Contacts Entry
You can assign an image to a Contacts entry. The image is
displayed when the entry calls you.
To assign an image for an entry:
1. From standby mode, press Contacts (right softkey).
2. Select the entry for which you want to assign the image
and press .
3. Press Options (right softkey) > Edit; or if you are selecting
an email or Web address, press Edit (right softkey).
4. Press the navigation key up to highlight the icon and
press .
5. Select an image and press , and then press OK (left
softkey) to assign the image to the entry.
6. Press Save (left softkey) to save the image type.