Sanyo SCP-8400 - Using the Countdown Timer

Section 2G: Using the Phone’s Calendar and Tools 125
Using the Countdown Timer
This feature allows you to use the countdown timer with
alarm capabilities. You can set up to five timers.
To use the countdown timer:
1. Select > Tools > More Tools > Countdown.
2. Select a number and the following items.

Description to enter a description of the countdown
(up to 14 characters).

Time to enter the countdown time.

Alarm to set the countdown alarm on or off.
3. Press Save (left softkey) to save the countdown settings.
4. Press Settings (right softkey), and then use your keypad
or navigation key to set the Ringer Length,
Snooze Interval, or Snooze Times.
5. Press Done (left softkey) to save.
Tip:Press On/Off (leftsoftkey) to toggle the countdown alarm on and off.
Tip:This feature is not available while your phone is turned off.
Calendar & Tools