EasyManua.ls Logo

Sanyo SCP-8400 - Setting the Self-Timer

Sanyo SCP-8400
282 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
158 Section 2J: Using Your Phone’s Built-in Camera
Setting the Self-Timer
To activate the self-timer:
1. From camera mode, select Options (right softkey) >
Self-Timer.
2. Highlight the length of delay you want the timer to use
(10 Seconds or 5 Seconds) and press .
3. Select Start (left softkey) when you are ready to start the
timer. ( appears on the upper right portion of the
Main LCD during the self-timer countdown.)
4. Get ready for the picture. (When the timer is down to
three seconds, the self-timer icon will turn red and the
phone will begin to beep.)
To cancel the self-timer after it has started:
Press Cancel (right softkey).
Note:While the self-timer is active, all keys are disabled except , ,
and Cancel (right softkey).

Table of Contents

Related product manuals