Sanyo SCP-8400 - Turning Bluetooth on and off; Bluetooth Status Indicators

214 Section 2M: Using Bluetooth
Turning Bluetooth On and Off
By default, your phone’s Bluetooth feature is turned off.
Turning Bluetooth on makes your phone “available”to other
in-range Bluetooth devices. To make your phone visible to
other devices you must also set your phone’s visibility to other
than Hidden. (See page 216.)
To turn Bluetooth on:
1. Press > Settings > Bluetooth > Enable/Disable.
2. Select Enable to enable Bluetooth.
To turn Bluetooth off:
1. Press > Settings > Bluetooth >Enable/Disable.
2. Select Disable to disable Bluetooth.
Note:Enabling the Bluetooth settings affect the battery’s talk and standby
times.
Bluetooth Status Indicators
The following icons show your Bluetooth connection status at
a glance:

– Bluetooth feature is active. It turns to green when
connected to a Bluetooth device.

– Your phone is discoverable by another Bluetooth
device.

– Your phone is communicating with a Bluetooth
device.