40 Section 2A: Your Phone – The Basics
To dial or save phone numbers with pauses:
1. Enter the phone number.
2. Press Options (right softkey)> Hard Pause or 2-Sec. Pause.
(Hard pauses are displayed as a “P”and two-second
pauses as a “T.”)
3. Enter additional numbers.
4. Press or to dial the number.
– or –
To save the number in your Contacts, press Options (right
softkey)> Save Phone#.
Note: When dialing a number with a hard pause, press to send the
next set of numbers.
Plus (+) Code Dialing
When placing international calls, you can use Plus Code
Dialing to automatically enter the international access code
for your location (for example, 011 for international calls
made from the United States). This feature is subject to
network availability.
To make a call using Plus Code Dialing:
1. Press and hold until a “+”appears on your
phone display.
2. Dial the country code and phone number you’re calling
and press or . (The access code for
international dialing will automatically be dialed,
followed by the country code and phone number.)
To Next Page
Loading...
