EasyManua.ls Logo

Sanyo SCP-8400 - Setting a Start-Up;Power off Tone; Using Voice Prompt; Setting up Key Press Echo

Sanyo SCP-8400
282 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
52 Section 2B: Controlling Your Phone’s Settings
Setting a Start-up/Power-off Tone
To set a start-up/power-off tone:
1. Select > Settings > Sounds > Others.
2. Select Start-up Tone or Power-off Tone.
3. Scroll to select a tone and press .
Using Voice Prompt
This feature allows you to hear voice prompts atVoice
Recorder, Screen Call setting, etc. (default setting is off).
To enable or disable voice prompt:
1. Select > Settings > Sounds > Others > Voice Prompt.
2. Select On or Off.
Tip: When ringer volume is set to “Silence All,”voice prompts cannot be heard.
Setting Up Key Press Echo
With this feature, you can hear a voice say the numbers when
you press the keypad. This feature is available when you are in
standby mode.
To turn Key Press Echo on or off:
1. Select > Settings > Sounds > Others > Key Press Echo.
2. Select On or Off.

Table of Contents

Related product manuals