Sanyo SCP-8400 - Setting Callback Number; Adding a Customized Signature

Section 2B: Controlling Your Phone’s Settings 65
Setting a Callback Number
With this feature, you can notify your recipients of your
callback number with a text message.
To set the callback number:
1. Select > Settings > Messaging > Text > Send Callback#.
2. Press , and then select an option from the following
and press .

None to send no callback number.

My Phone# to send your phone number.

Other to send a specific callback number. To set a
number, enter a phone number and press .
Adding a Customized Signature
Each message you send can have a customized signature to
reflect your personality.
To add a customized signature to each sent message:
1. Select > Settings > Messaging > Text > Signature.
2. Press , and then select On.
3. Select Text, enter your signature, and press OK (left
softkey). (See “Entering Text”on page 43.)
4. Press Save (left softkey) to save your signature.
Tip: You can insert your signature even when your signature setting is off.
Press Mode (right softkey) and select Signaturewhile composing your
message.
Your Phone’s Settings