Section 2A. Phone Basics 17
Installing the Battery
1. Insert the battery into the opening on the back of the
phone, making sure the connectors align (1). Gently
press down to secure the battery (2).
2. Replace the battery cover and slide it upward until
you heara click (3).
Removing the Battery
1. Make sure the power is off so that you don’t lose any
stored numbers or messages.
2. Press the battery release latch (1) and slide the
battery cover downward and remove it (2).
3. Lift up the battery and remove it from the phone (3).
Charging the Battery
Charge your battery as soon as possible so you can
begin using your phone.
Keeping track of your battery’s charge is important. If
yourbattery level becomes too low, yourphone
automatically turns off, and you will lose any information
you were just working on. For a quick check of your
battery level, glance at the battery charge indicator
located in the upper-right corner of your phone’s display
screen. If the battery charge is getting too low, the battery
icon ( ) blinks and the phone sounds a warning tone.
Always use a Sprint-approved or manufacturer-
approved desktop charger, travel charger, or vehicle
power adapter to charge yourbattery.
To Next Page
Loading...
