38 Section 2B. Settings
Adjusting the Alert Volume
You can set the alert volume separately from the ringer
volume setting.
1. Press Menu > Settings > Sounds > Volume >
Advanced...
2. Select Alarms, Text Message, Picture Mail, Voicemail,
VoiceSMS, or Email.
3. Using the navigation key, select Separate Vol.
4. Press the navigation key left or right to choose a
volume level, and press Done (left softkey).
Alert Notification
Set yourphone to alert you with an audible tone when
you change service areas, once a minute during a voice
call, or when a call has been connected.
1. Press Menu > Settings > Sounds > Alerts.
2. Select Beep Each Minute, Out of Service, Connect,
Signal Fade/Call Drop, or Messages and press .
n
If you select Messages, select Text Message,
Picture Mail, Voicemail, VoiceSMS or Email > Repeat
or RingerLength.
3. Select On, Off, or an available option and press .
Silence All
The Silence All option allows you to mute all sounds
without turning your phone off.
To activate Silence All:
©
With the phone open, press and hold the volume key
down in standby mode. (The screen will display
“Silence All.”)
To deactivate Silence All:
©
Press the volume key up repeatedly to select a
volume level.
Tip
You can make the ringer vibrate at any volume level
by checking
Always Vibrate.
To Next Page
Loading...
