Sanyo SPW-C0705DZH8 - Page 133

If you accidentally copy over a program in the group program copy mode, holding down the CANCEL
button for more than 2 seconds returns the program to the point prior to pressing the PROG. COPY
GROUP button in STEP 1. (All changes and copy operations made up until that point are cleared.)
If a program already exists in the copy destination group, the newly copied program overwrites the
existing program.
The normal display returns.
Press the PROG. COPY GROUP button to enter the
copied programs in the selected groups.
STEP 6
STEP 5 Select other copy destination groups if desired.
If a group from numbers 1 to 4 was selected as the
copy destination group, that number appears in the
program area. If a group from numbers 5 to 8
was selected, that number appears in the program
area.
You can copy the selected source group programs
into other groups by repeatedly pressing the
GROUP button to select a group followed by the
SET button to set it.
NOTE
NOTE
3-81
Control of 3-WAY ECO-i SYSTEM
1
2
3
4
5
6
7
8
5. Schedule Timer
TD831143-00W-3WAY.indb81TD831143-00W-3WAY.indb81 2008/12/0110:26:462008/12/0110:26:46