Sanyo SPW-C0705DZH8 - How to Clear Programs; To Cancel Specific Days; To Cancel Individual Programs on Specific Days

How to Clear Programs
Press the PROGRAM button.
When the PROGRAM button is pressed, the group No. and the
present day of the week start blinking and the present time
indication changes to a blinking “PG-1”.
Press the GROUP button to select a group to clear.
Group selection will be disabled during installation. If so,
proceed to the next step.
Holding down the CANCEL button for more than 2 seconds
returns the program to the point prior to pressing the PROGRAM
button. (All operations made up until that point are cleared.)
To cancel individual programs on specific days
To cancel specific days
Example:
Display after clearing
programmed operation
above
Press the PROGRAM button to enter the clear
operation. The normal display returns.
Select a day and press the SET button.
Programmed operations through start
blinking in rotation, therefore press the CLEAR
button when the programmed operation to clear
starts blinking. (The remaining programmed
operations are automatically arranged in the
order of earliest time first.)
Press the PROGRAM button to enter the clear
operation. The normal display returns without
the program schedule marker ( ) underneath
the days of the week.
Select a day to cancel using the DAY button
and press the CLEAR button. All settings in
programmed operations through are
cleared. The display appears as shown above.
NOTE
3-84
Control of 3-WAY ECO-i SYSTEM
1
2
3
4
5
6
7
8
5. Schedule Timer
TD831143-00W-3WAY.indb84TD831143-00W-3WAY.indb84 2008/12/0110:26:462008/12/0110:26:46