Sanyo SPW-C0705DZH8 - 2. Features of 3-WAY ECO-i SYSTEM

1-4
Outline of 3-WAY ECO-i SYSTEM
1
2
3
4
5
6
7
8
System example
* SANYO makes it possible to link outdoor unit
together for a large capacity (48HP).
Since all pipings are concentrated
into one pipe shaft, you can minimize
piping space and construction labor
Maximum number of combined outdoor units
Maximum actual piping length
3
48 HP
40
50~130%
150m
300m
System limitations
*If the additional installment of outdoor and indoor units
are expected, the size of refrigerant piping should be
decided according to the total capacity after the addition.
*1 The connection between the indoor unit(s) and the solenoid
valve kit(s) has three (3) types of methods. For further details,
refer to the Section 2. 3-4. "Connecting Multiple Indoor Units
to a Single Solenoid Valve Kit".
1
1121
1
1
111
1
111
12
1
1
1
1
2
1
1
2
1
2
1
2
1
3
8
10
12
14
16
10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48
Total horse
power
Inverter unit
Combination of outdoor units
Maximum horsepower of combined outdoor units
Maximum number of connectable indoor units
Indoor/outdoor unit capacity ratio
Maximum level difference (when outdoor unit is lower)
Maximum total piping length
50 (40)m
If indoor/outdoor units need servicing, a ball
valve (optional) cuts off non-operational
units to let other units stay running.
If your indoor capacity load
changes in the future, it’s easy to
add on both indoor and outdoor
units using the same pipings.
8
1
2
1
1
1
1
ADDITION
CONCENTRATION
CONNECTION
Inverter unit Inverter unit
Solenoid
valve kit
*1
Indoor unit
2. Features of 3-WAY ECO-i SYSTEM
2-1. Outline of 3-WAY ECO-i SYSTEM
TD831143-00W-3WAY.indb4TD831143-00W-3WAY.indb4 2008/12/0110:25:322008/12/0110:25:32