Sanyo SPW-C0705DZH8 - Page 87

3-35
Control of 3-WAY ECO-i SYSTEM
1
2
3
4
5
6
7
8
3. Timer Remote Controller
4. Set the program pattern.
(program step 3)
There are 4 program patterns.
Pressing
/ repeats the following display patterns.
Pattern 1
The indoor unit starts operation at the programmed
time.
Pattern 2
The indoor unit stops operation at the programmed
time.
Pattern 3
The indoor unit starts operation at the programmed
time and changes the temperature settings.
Press
/ to change the temperature setting.
Pattern 4
The indoor unit changes the temperature setting at
the programmed time.
Press
/ to change the temperature setting.
Pattern 1
Pattern 2
Pattern 3
Pattern 4
Weekly Program Function (Continued)
Select the program pattern and press . The program timer setting is confi rmed and the unit enters the confi rmation mode .
NOTE
If you press during the setting, it returns to the program confi rmation mode.
If there is no operation made for 3 minutes during the setting, it returns to the normal mode.
In this case, all the settings in progress will be invalid.
TD831143-00W-3WAY.indb35TD831143-00W-3WAY.indb35 2008/12/0110:26:322008/12/0110:26:32