EasyManua.ls Logo

Sanyo SPW-CR703GDCH8 - Wall-Mounted Type

Sanyo SPW-CR703GDCH8
377 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1
TD831077
I-11
Outline of W-ECO MULTI SYSTEM
3-4. Wall-mounted type
KR93GH, KR123GH, KR183GH
K93GH, K123GH, K183GH
3. Outline of Indoor Unit
582_8132
Sophisticated Color and Round Surface Design
Simple installation work
3-way tubing possible
Air sweep function
The air sweep function moves the flap up and down in
the air outlet, directing air in a “sweeping” motion
around the room and providing comfort in every corner.
When indoor units are installed
in a calm place where low noise
is required such as hotel rooms,
bed rooms or VIP rooms and so
on, noise from Electronic
Expansion Valve controlling
refrigerant flow may be offen-
sive to the ear during cooling
and heating operation.
In order to prevent the noise,
please install optional External
Electronic Expansion Valve Kit
(ATK-SVK80TG/SVK140TG) at
narrow tube 5 to 15 m away
from indoor unit.
Ideal air flow realized for both heating and
cooling. Auto flap feature comes as stan-
dard.
The air flow direction is
automatically set for both
cooling and heating.
While heating with Lo
speed, the blowout angle
is directed downward so
as to warm up the feet.
The blowout angle is
adjusted in 5 stages from
4 degrees upward to
80 degrees downward. In
addition, there is the auto
swing feature to further
widen the air stream.
Whisper-quiet operation
Noise values
Type 18 25 36 48
Hi / Me / Lo 36 / 33 / 30 39 / 37 / 34 42 / 40 / 35 44 / 41 / 37
Flap
90°
1274_K_I
1273_K_I
Right-rear
tubing
(recommended)
Left
tubing
Left-rear tubing
3-5. Ceiling-mounted type
TR183GH, TR253GH, TR363GH, TR483GH
IMPORTANT
784_8132
3 m
1272_T_I

Table of Contents

Related product manuals