Sanyo SPW-CR703GDCH8 - Page 68

Control of W-ECO MULTI SYSTEM
3
TD831077
III - 10
SETTING
SETTING
2. Optional Controller (remote controller)
ON
OFF
OFF
NOTE
NOTE
SETTING
SETTING
OFF
OFF
OFF
ON
OFF
How to set the OFF timer ( )
(Example) To stop the air conditioner after 3:30.
Operation Indication
1. Press the ON / OFF button to start
the air conditioner.
2. Press the TIMER SET button to The
SETTING
and time indications
select mode.
\ flash.
3.
¶ Press the
button until 3.5 is
displayed.
¶ Press the button if the set time
is overexceed.
4. Press the SET button to set the
OFF timer.
How to set the OFF cycle timer ( )
(Example) To stop the air conditioner after 3:30 everytime
Operation
1. Press the ON / OFF button to start the air conditioner.
2. Press the TIMER SET button to set
.
3. Set the time using
button.
4. Press the SET button to set the OFF cycle timer ( ).
When the OFF cycle timer is set, the unit will stop after 3:30 every operation.
How to set the ON timer ( )
(Example) To start the air conditioner after 10:30.
Operation Indication
1. Press the ON / OFF button to
start the air conditioner.
2. Press the TIMER SET The
SETTING
and time
button to select mode.
\ indications flash.
3.
¶ Press the
button until 10.5 is
displayed.
¶ Press the
button if the set time
is overexceed.
4. Press the SET button to set
the ON timer.
When the ON timer is set, the unit enters the paused state.
OFF
ON