Sanyo SPW-CR703GDCH8 - Page 94

Control of W-ECO MULTI SYSTEM
3
TD831077
III - 36
2. Optional Controller (system controller)
How to start individual operation
How to start collective operation
NOTE
FLAP setting can be performed only for the unit which has no remote controller.
NOTE
In the ALL or ZONE mode, FLAP setting can not be performed. If necessary you should select GR mode and
use FLAP button.
SET CL
MODE
FAN SPEED
FLAP
SET TEMP.
SELECT
CENTRAL CTRL
GROUP
ZONE
GROUP
AIM
SET TEMP.
°C
STANDBY
ZONE
19
2 10
3 11
4
5 13
14
7
8
ON
OFF
•
•
TEST / CHK
ALL / ZONE / GR
Power
Keep the power supply
switch turned on more
than 5 hours before
starting operation.
Press the SELECT button
and select GROUP.
Press the ON / OFF button.
Set the desired fan
speed by pressing
the FAN SPEED button.
Set the desired temper-
ature by pressing one of
the temperature setting
buttons .
Stop
0200_M_I
Confirming the GROUP
No. to be
selected , once
again press the ON/OFF
button.
1
4
7
6
Select the GROUP
No. to be operated by
pressing GROUP select
button .
Select the control mode.
3
9
Select the ZONE No.
including the group to
be operated by pressing
ZONE button.
2
Set heating, dry, or
cooling by pressing
the MODE button.
To start individual operation
5
Set the airflow direction
at a specific angle or
sweep mode
8
0201_M_I
ALL
SET CL
MODE
FAN SPEED
FLAP
SET TEMP.
SELECT
CENTRAL CTRL
GROUP
ZONE
GROUP
SWEEP
SET TEMP.
°C
ZONE
1 9
2 10
3
4 12
5 13
14
7
8
ON
OFF
•
•
TEST / CHK
ALL / ZONE / GR
Power
Keep the power supply
switch turned on more
than 5 hours before
starting operation.
Press the SELECT button
and select ALL or ZONE.
In case of ZONE collective
operation.
Set heating, dry, or
cooling by pressing the
MODE button.
Set the desired fan
speed by pressing the
FAN SPEED button.
Set the desired temper-
ature by pressing one of
the temperature setting
buttons .
Stop
Confirming the ZONE
No. to be selected or ALL
indication, once again
press the ON/OFF button.
1
4
6
5
Press the ON / OFF button.
3
Select the control mode.
7
Select the ZONE No. to be
operated by pressing
ZONE button.
2
To start collective operation
(ALL or ZONE)