Sanyo SPW-X253GH56 - Fig; How to Install the Outdoor Unit; Installing the Outdoor Unit

56 S4179544
00
00
0
C
--
--
-
RC
==
==
=
WT
4. HOW TO INSTALL THE OUTDOOR UNIT
4-1. Transporting
When transporting the unit, have it delivered as close
to the installation site as possible without unpacking.
Remove one of the two bolts (M8) fixing the suspen-
sion plate, and screw the Eye-Bolt (field supply) at the
position indicated. In the same way, attach the Eye-
Bolts in the 4 positions. (Fig. 4-1)
Put the rope or strap through the hook of the Eye-Bolt.
(Fig. 4-1)
Lift the unit with its weight balanced and evenly sup-
ported. (Fig. 4-1)
To prevent damage, use protective material (such as
cloth or cardboard) at all points where the lifting rope
or strap touches the unit. (Fig. 4-1)
4-2. Installing the Outdoor Unit
(1) Install a block or a solid platform under the
outdoor unit which provides a minimum height of
5 cm from ground level. (Fig. 4-2)
(2) The outdoor unit must be bolted down tightly to
the blocks or platform with 4 anchor bolts.
(Fig. 4-3)
Fix the outdoor unit firmly so it will not fall during strong
wind gusts.
Fig. 4-1
0109_C_I
Min. 5 cm
Fig. 4-2
Fig. 4-3
0188_C_I
925
1098
883
1218
830
925
0108_C_I
Rope or strap
Eye-Bolt and
suspension plate
Eye-Bolt (field supply)
Protective cloth
or cardboad
Rope or strap
)1
!"#)*+123
Suspension plate
Bolt (M8)
!'()/017
!")*12
9:

:;