EasyManua.ls Logo

Sanyo SRT-2400DC - Page 30

Sanyo SRT-2400DC
50 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PROGRAM TIMER RECORDING
Setting the Holidays
By setting the holidays, timer recording will be conducted
on those days, as set for Sundays.
1
Press the MENU button until the (HOLIDAY SET)
menu is displayed.
@@@@@<HOLIDAY@SET>
@@1@@-----@@@11@@-----
@@2@@-----@@@12@@-----
@@3@@-----@@@13@@-----
@@4@@-----@@@14@@-----
@@5@@-----@@@15@@-----
@@6@@-----@@@16@@-----
@@7@@-----@@@17@@-----
@@8@@-----@@@18@@-----
@@9@@-----@@@19@@-----
@10@@-----@@@20@@-----
2
Press the l (or j) button to set the month of the
holiday, then press the * button.
3 Press the l (or j) button to set the day of the holiday.
4 Press the * (or ]) button until the next line to set
start flashing.
°
Repeat steps 2 to 4 to set up to 20 holidays.
5
Press the PAUSE/SEARCH button to save the
settings.
NOTE:
If setting holidays, be sure that a timer recording is set
for Sunday. If not, this function will not operate.
If a timer recording for Sundays is entered, the holidays
timer recording will not function if the program timer
recording mode is set to N”.
To erase a setting, follow the same procedure as
above, but at step 2 and 3, enter -- instead of a
setting.
Changing a Program Timer Recording
1
Press the MENU button until the (TIMER SET) menu
is displayed.
2
Press the * (or ]) button until the setting to correct is
flashing.
3
Press the l (or j) button to correct the setting.
4
Press the PAUSE/SEARCH button to save the
settings.
5
Press the TIMER button.
To Cancel a Program Timer Recording
1
Press the MENU button until the (TIMER SET) menu
is displayed.
2
Press the * (or ]) button until the Y” corresponding
to the timer recording to cancel is flashing.
3
Press the l (or j) button to select N”.
4
Press the PAUSE/SEARCH button to save the
settings.
5
Press the TIMER button.
To Cancel all Program Timer Recordings
1
Press the MENU button until the (TIMER SET) menu
is displayed.
2
Press the MENU RESET button.
°
All programmed timer recordings are erased.
3
Press the PAUSE/SEARCH button, the normal
screen is displayed.
NU4QG/NA3 (SRT-2400DC GB) Mon. Sept., 17/2001
English
29

Related product manuals