What to do if the rinsing process is not completed correctly in Sanyo Washer?
If the rinsing process in your Sanyo Washer isn't completing correctly, ensure you are thoroughly following all rinsing steps. Also, repeat the rinse process 2 to 3 times as needed.
General| Washing Capacity | 7 kg |
|---|---|
| Spin Speed | 700 RPM |
| Water Level Selection | Yes |
| Type | Top Load |
| Voltage | 220V |
Identifies and labels the controls on the washing machine's front panel.
Lists and illustrates the included accessories for the washing machine.
Highlights critical safety warnings to prevent hazards like fire, electric shock, and injury.
Provides important precautions to avoid damage to the machine or potential minor injuries.
Guides on selecting a suitable, stable, and level location for machine placement.
Details the correct procedure for connecting the drain hose, including height and immersion rules.
Step-by-step guide on how to perform the washing cycle.
Instructions for the rinsing process after washing.
Detailed steps for effectively spinning clothes to remove excess water.
Explains how to drain water from the machine, with model-specific instructions.
Addresses issues where the washing machine fails to start or operate.
Explains common problems encountered during the spin-drying phase.
Guides on troubleshooting when the machine does not drain water correctly.
Discusses issues related to overloading the washing machine.
To Next Page
