Sanyo VM-D6P - LINEAR TIME TAPE COUNTER

LINEAR TIME TAPE COUNTER
The linear time tape counter indicates tape running in hour,
minute and second. Reset the counter (0:00:00) at the
beginning of recording or playback and you can easily
determine the remainder of the tape or search the recorded
scene you want to see.
RESET
1. Press the RESET button.
The tape counter will return to "0:00:00" in the viewfinder.
Reset the counter at the beginning of the tape and you
can easily calculate the remaining tape length, while tape
is running. (Subtract the current counts from the nominal
tape recording time.
COUNTER MEMORY FUNCTION
Using this function you can find the tape position where you
have reset the timer. Reset the counter, during recording or
playing back, upon encountering a scene you want to see
again.
1. Press the MEMORY button.
The counter memorizes the tape positlon you have reset.
The letter "M" will appear in the viewfinder.
To cancel the memory mode, press the MEMORY button
again.
2. Press the REW button.
The tape will rewind and automatically stop in the vicinity
of the "0:00:00" counter reading.
If the counter reads a minus value, press the FF button.
M 0:46:27
Notes :
eThere may be a small discrepancy between the counter reading and the actual tape running time.
@ The counter will indicate a minus reading if the REW function does not stop at 0:00:00 reading.