Sanyo VM-D6P - SMOOTH RECORDING;INSERT EDIT

SMOOTH RECORDING/INSERT EDIT
If you find scenes you've just recorded are unwanted, they
can be replaced with new scenes by using smooth recording
function.
REC
button
STILL button
—R. Unclear picture
Newly recorded scene
1. Pressthe REC START/STOP button to enter the recording
pause mode.
2. Press the SCENE SEARCH button, watch the viewfinder
and locate the beginning of the scene to be re-recorded.
Press “+” -- It will go to normal playback speed.
Press "—" -- It will go to reverse playback.
Helease the button at the beginning of the scene.
(The unit will return to the recording pause mode.)
3. Start recording by pressing the REC START/STOP
button.
To chain a new scene to the end of recorded scene, first
playback the tape and press the STILL button the moment
you encounter the chaining point. Press the REC button to
pause the picture. Start recording by pressing the REC
START/STOP button.
Note : ; VU
e During SCENE SEARCH in the chain-recording, noise
may. appear in. the. viewfinder irrespective of the
playback direction, NORMAL or REVERSE.