Sanyo VM-D6P - IMPORTANT NOTES

IMPORTANT NOTES
1.
Do not expose this unit to high temperatures.
Excessive heat may damage the unit.
€ Do not place this unit near a heat source (heaters, etc.).
€ Do not leave this unit in a closed car on warm or hot
days.
Abnormal operation.
If you notice anything unusual (smoke, strange noise or
odour, etc.), switch the unit off immediately. Consult the
dealer where the unit was purchased, or contact a
Sanyo-authorized service station.
Moisture and foreign objects.
€ Do not allow moisture (rain, steam, dew, salt water,
etc.) to enter the unit.
€ Do not allow any foreign objects (sand, metal objects,
flammable articles, etc.) to enter the unit.
@ Do not place anything except tape cassettes and the
power packs in the unit.
Strong lights.
eDo not aim the camcorder directly at bright light
sources.
€ Do not place the unit near bright light sources, as heat
damage may result.
5.
Do not use this unit under the following conditions :
@ In location with high humidity.
€ In areas subject to high vibration.
e Where excessive dust or dirt is present.
€ Near strong magnetic fields (e.g. near transmitting
antennas, motors, fluorescent lights).
Do not use the unit for monitoring only.
If the unit is used to record the same subject for a long
time, e.g. for special applications such as monitoring, the
picture quality will deteriorate.
Do not wrap the unit in a cloth etc.
If wrapped in a cloth during operation, the temperature
inside the unit will rise excessively causing the unit to
malfunction.