n
On-screen display
When the camcorder is connected to a lV receiver,
the indications appearing in the viewfinder can be
displayed on the TV screen by pressing the DATA
button on the camcorder or remote control.
Pressing this button again will cancel the on-screen
display.
Note
If the on-screen display is activated during tape
copy, it will be recorded on the tape along with the
picture and sound.
n
Tape copy
By connecting the camcorder to
a VCR, you
can
copy the recorded tape in your camcorder to a tape
that can be played back on your VCR.
For details, please refer to your VCR instruction
manual.
Note
Please
refer to the accessories listing
for the
cable and adaptor used for the connections.
Accessories not listed in the accessories listing
must be bought separately.
i VM-EX410P
18
English
r-l
To Next Page
Loading...
