EasyManua.ls Logo

Sanyo VPC-HD1000 - How to Use the Manual Focus

Sanyo VPC-HD1000
243 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English 108
NORMAL/SHOOTING
How to use the manual focus
1 Display the NORMAL Mode Shooting Menu (page 49), select
“FOCUS”, and press the SET button.
2 Select “MANUAL”, and press the
SET button.
h The focus distance adjustment
bar appears.
3 Toggle the SET button to the left
or right to adjust the focus
distance, and press the SET
button.
h The focus distance is set, and
you are returned to the Shooting
Screen.
HINT
About the focus range
i The focus distance indication shows the distance between the center of
the lens and the subject.
i In some cases there may be a slight variance between the distance
(numerical figure) you set in the manual focus mode and the actual
distance.
About zoom movement when using the manual focus
i If the focus distance is set to 70 cm (27.56 in.) or less, the zoom changes
to the largest setting that is suitable for that focus distance.
i When the focus distance is set to 70 cm (27.56 in.) or less, the zoom will
function only within the range at which the image is focused.
362 00:05:07
362 00:05:07
362 00:05:07
2.0
m
Downloaded From VideoCamera-Manual.com Manuals

Table of Contents

Other manuals for Sanyo VPC-HD1000

Related product manuals