Sanyo VPC-HD1000 - Shooting and Playback with the Remote Control Unit

English 82
SIMPLE/SHOOTING
SHOOTING AND PLAYBACK WITH
THE REMOTE CONTROL UNIT
The remote control sensor on your camera makes it possible to capture
images and play them back using the supplied remote control unit.
1 Prepare the remote control unit (page 30).
2 Turn the camera on, and set the REC/PLAY switch to REC or PLAY.
h Set the REC/PLAY switch to REC for shooting, or to PLAY for
playback.
3 Aim the remote control unit at the camera’s remote control sensor.
h Open the monitor unit.
4 Press the buttons on the remote control unit to operate the camera
(page 26).
Downloaded From VideoCamera-Manual.com Manuals