Sanyo VSP-9000 - C Monitor;Local Mux; (Valid;Invalid Setup for Hard Disk Digital Recorder with Multiplexer)

English
Software 66
System Setup (Setup)
C Monitor/Local Mux
(Valid/Invalid setup for hard disk digital recorder with multiplexer)
1
Click the [Monitor/Local Mux]
tab.
2
Set the video equipment
output using the various
buttons.
: Clear button
Invalidates all video equipment.
: Single row invalidate button
Sets a row to be invalid.
: All valid button
Validates all video equipment.
: Single row switch button
Sets a row to be valid.
3
For video equipment not
connected, turn the checkbox
OFF (blank).
4
Make the various selections.
• To make other settings, switch using
the tabs and continue operation.
• To save settings in the PC, on the “File”
menu select “Save”.
• When selecting “Send to keyboard” on
the “File” menu, the system setup
content is uploaded to the unit.
2
3
1