Sanyo VWM-700 - VCR Plus+ PROGRAMMING SYSTEM

TIMER RECORDING WI TH THE VCR Plus+
PROGRAMMING SYSTEM.
From Antenna
or
Cable-TV
System
VCR
T V
32
WHAT IS VCR Plus+ PROGRAMMING SYSTEM?
The VCR Plus+ Programming System is a timer programming
system which
simplifies timer recording programming. Instead of
entering the date,
channel position, and recording timer for the
timer,
simply enter the PlusCode ., programming number of the
program to record. These
PlusCode® programming number can
be found in most TV magazine and newspaper listings.
To activate the VCR Plus+ programming system, it is necessary
that the preset
channel positions match the guide channels which
are assigned to the TV
channels (channel mapping). If they do not
match, you have to
channel mapping before starting timer record-
ing using the VCR
Plus+ system.
ANTENNA/CABLE CONNECTIONS
The Channel Mapping set-up depends on the specific antenna or
cable-TV connection that you have used to hook-up your VCR in
your home. Look left to determine the connection that you have
used and
follow the VCR Plus+ Channel Mapping instructions that
apply.
Direct connection from either a home antenna or cable-TV system
that does not require a
cable box. Details are on page 7 for a
home antenna and page 8-9 for
cable system.
If your VCR is connected like this, follow the VCR Plus+ Channel
Mapping instructions on next page.