Sanyo Xacti VPC-CA 9 - TV Output Setting

125 English
INTRODUCTION TO THE OPTION SETTING MENU
TV output setting
Specify the type of image signal that is output from your camera’s USB/AV
terminal.
1 Select “TV OUTPUT”, and press
the SET button.
TV SYSTEM:
Set the type of TV signal that is
output from the USB/AV terminal.
TV TYPE:
Set the TV’s aspect ratio.
COMPONENT:
Set the signal that is output from
the USB/AV terminal.
NTSC
16:9
720i
TV OUTPUT
TV SYSTEM
TV TYPE
COMPONENT
OK