131 English
SELECT THE STARTUP DISPLAY
The startup display is the display that appears on the monitor when the
camera is turned on in the recording mode.
1 Display the Option Setting Menu [E1] (page 129).
2 Select “STARTUP DISPLAY”, and
press the SET button.
DATE & TIME:
The camera’s date and time setting
is shown.
Xacti:
The Xacti logo is shown.
OFF:
No startup display.
3 Select the desired setting, and press the SET button.
h The selected startup display is set.
OK
OFF
Xacti
DATE & TIME
STARTUP DISPLAY
To Next Page
Loading...
