139 English
FLICKER-REDUCTION
The flicker-reduction setting reduces the flicker that results when filming video
clips under fluorescent lights and the like where the background lighting
pulsates at the frequency of the power supply.
1 Display the Option Setting Menu [2] (page 129).
2 Select “FLICKER REDUCT”, and
press the SET button.
ON:
Turns on the flicker-reduction setting.
OFF:
Turns off the flicker-reduction setting.
3 Select the desired setting, and press
the SET button.
h This completes the flicker-reduction
setting.
HINT
i If the flicker-reduction setting is used outdoors on a very bright day, a
halation effect, which produces diffused rings of light around bright light
areas, may occur.
i The exposure setting and flicker reduction function cannot both be enabled
at the same time.
i When the flicker-reduction function is set to “ON”, the shutter speed during
video clip recording becomes 1/100 sec.
OK
OFF
ON
FLICKER REDUCT
To Next Page
Loading...
