Sanyo Xacti VPC-CG9 - Printing; Printing Selected Images

English 174
CONNECTING TO A PRINTER
PRINTING
Printing selected images
Procedure to select one still image and print it.
1 Complete the printing setup (page 172).
2 Select the one image icon Y, and
press the SET button.
h The screen to select images for
printing appears.
3 Toggle the SET button to the left
or right to display the image you
wish to print.
h Specify the image to print.
4 Specify the number of prints.
1 Toggle the SET button up to
select “COPIES”, and press the
SET button.
2 Toggle the SET button up or
down to specify the number of
prints.
3 Press the SET button.
h “PRINT” is selected.
5 Press the SET button.
h Printing begins.
HINT
To cancel printing
1 During printing, toggle the SET button down.
h The Confirm Cancel Printing Screen appears.
2 Select “CANCEL”, and press the SET button.
h If “EXIT” is selected and the SET button is pressed, printing resumes.
PRINT 1 IMAGE
:1
OK
copy
EXIT
PRINT
100-0022
EXIT
PRINT
COPIES
PRINT 1 IMAGE
:1
copy
100-0022